Measuring Transducers
Measuring transducers are instruments used for conversion of electrical quantities in single and three phase electrical systems. Input-output characteristics can be created with five breaking points for unipolar and bipolar output signals. They can be used in places where you need analogue output quantities as input into another device. They are able to do permanent analysis of electricity supply quality in compliance with the SIST EN 50160 standard. Records can be stored in the internal memory for the period of the last three years. Except for »classical« analogue outputs, our measuring transducers can also provide you with tariff, alarm and pulse outputs for monitoring different tariffs or as PLC inputs. Together they can have up to four outputs. They can have also tariff inputs. Communication, outputs and auxiliary power supply are electrically insulated from other system. Transducers can be programmed via serial port. Data used for system analyses can be send to a PC. They can measure single or multiple electrical parameters. Their input can be AC or DC. Our transducers are the answer for practically your every need.
The MT 560 / UMT 560 multi transducer and analyser is used for a permanent analysis of electricity supply quality in compliance with the SIST EN 50160 standard.
MT 550 / UMT 550 is intended for measuring, analysing and monitoring single-phase or three-phase electrical power network.
The MT 540 / UMT 540 multifunction transducer is used for measuring and monitoring single-phase or three-phase electrical power network. Optional limits and required quality in a monitored period can be defined for each monitored characteristic.
Remote display is very useful for a quick look-up to all measured parameters or to set up the (U)MT5x0 measuring transducers without the PC.
(U)MT 518 is intended for measuring and monitoring single-phase electrical power network.
(U)MT 516 is intended for measuring and monitoring single-phase electrical power network.
(U)MT 511 is intended for measuring and monitoring single-phase electrical power network.
(U)MT 510 is intended for measuring and monitoring single-phase electrical power network.
Programmable measuring transducer MI 404 generates 4 electrically insulated, load independent analogue output signals (DC voltage or DC current).
The MI 401 programmable measuring transducer supervises quantities of an electrical system. A large input range allows use of transducer for measuring of any standard AC current and voltage.
The MI 400 programmable measuring transducer supervises an electrical system. A large input range allows use of transducer for measuring any standard AC current and voltage.
The MI 458 measuring transducer is designed for use in industrial process for conversion of DC current in to appropriate DC current or DC voltage signals.
The MI 456 measuring transducer is designed for use in industrial processes for conversion of DC voltage into appropriate DC current or DC voltage signals.
The MI 454 measuring transducer is designed to convert the wiper position of a potentiometer or slide wire into an accurate proportional DC current or DC voltage signals.
The MI 452 measuring transducer is designed for use in industrial processes for conversion of resistance into appropriate DC current or DC voltage signals.
The MI 450 measuring transducer is designed for use in industrial processes for conversion of nonlinear resistance sensors (RTD – sensors) into appropriate DC current or DC voltage signals.
The MI 438 programmable measuring transducer allows simultaneous measuring of three currents of the same frequency.
The MI 436 programmable measuring transducer allows simultaneous measuring of three voltages of the same frequency with a common zero (three phase system).
The MI 421 programmable power factor measuring transducer converts input quantities into DC current or DC voltage proportional to the measured power factor.
The MI 420 programmable frequency transducer converts a frequency of sinusoidal voltage signal into a load-independent DC current or a load-independent DC voltage.
The MI 418 measuring transducer converts an AC current into a load-independent DC current or a load-independent DC voltage.
The MI 416 measuring transducer converts an AC voltage into a load-independent DC current or a load-independent DC voltage.
The MI 414 measuring transducer measures reactive power and converts input AC quantities into DC voltage or current programmable output, proportional to the measured value.
The MI 413 measuring transducer measures active power and converts input AC quantities into DC voltage or current programmable output, proportional to the measured value.
The MI 408 measuring transducer converts sinusoidal AC current signals into proportional DC current signals.
The MI 406 measuring transducer converts sinusoidal AC voltage signals into proportional DC current signals.