MI 485

MI485-K.JPG

MI 485 is used for connecting instruments with RS 485 communication on RS 232 devices (PC-s, PLC-s and others). It is used for converting RS 485 signal into RS 232 signal and vice versa. Signals are galvanically separated. With MI 485 communication adapter and software, instruments can be set and read. Communication speed is up to 115 200 bps. Communication interface is mounted on standard rail 35 x 15 mm (according to DIN EN 50022).







Connections:

  • Auxiliary supply – connected on connection terminals 13, 14

  • RS 232 communication , max length 3m



    • MI 485

    Computer - DB9

    TX (26)

    Rx (2)

    Rx (24)

    Tx (3)

    GND (25)

    GND (5)




  • RS 485 communication, up to 32 devices, line must be ended  
         with 120 Ω resistor.


    • MI 485

    RS 485 instruments

    A (21)

    DATA +

    B (23)

    DATA -




    Features:

  • Convert RS232 to RS485

  • Galvanic separation

  • Transmission rate up to 115.200 bit/s

  • LED diodes for communication indication

  • Low power consumption

  • Universal AC/DC or AC auxiliary power supply

  • Housing for DIN rail mounting



    • PC-TCP/IP

    Documentation

    Data sheets:
    MI 485 Technical documentation
    Measuring Transducers Flyer
    MODBUS Protocol table
    Catalogue page
    Dimensional drawings
    Connection diagrams
    Catalogue page (in Italian language)
    Connection Diagrams (in Italian language)
    Catalogue page (in Spanish language)
    Connection diagrams (in Spanish language)
    Catalogue page (in Serbian language)
    Connection diagrams (in Serbian language)


    Manuals:
    MI 485 User's Manual

    Declaration of Conformity:
    MI 485 EC Declaration of Conformity

    You must be registered in order to see the above documents.