ISPRO-K BS(R) 50 (4+0)
The ISPRO-K BS(R) 50 (4 + 0) series of over voltage surge protective devices has been developed to protect against partial direct and indirect lightning discharges and is intended to provide protection in zones 0A – 1 as per IEC 62305.
The (4 + 0) range is intended to be used on TNS three phase networks whit separate N and PE conductors.
The circuit topology consists of four varistor stages each protected by a thermal disconnection device. Each three phase unit comprises a total of four high performance MOV blocks, providing a high surge rating suitable for primary service entrance applications.
A unique indicator monitors all disconnectors and brings up a common status flag if any one stage should fail.
Category IEC/EN/VDE | Class I/ Type1/B+C |
Location of use | Main distribution boards |
Protection modes | L/N-PE |
Protection element | High Energy MOVs |
High surge discharge ratings | Iimp = 12,5 kA/pole, Imax = 50 kA/pole |
Internal protection and safety | Separate thermal disconnector for each MOV block |
Status indication | Mechanical flag + remote contacts (R) |
Housing | Compact design |
Documentation
Data sheets:
Catalogue Pages
Connections
Declaration of Conformity:
EC Declaration of Conformity
You must be registered in order to see the above documents.