Repetitors

Catalogue


GSM repeater GOR-70 ( 60, 80 ) is applied on the places, where the GSM signal is low: in the basements, ground floor, offices, hotels, private houses, shopping malls, etc.

Booster amplifies the GSM signal ( 900 MHz ) and distributes it around the place wireless.

Montage of the GSM repeater is very difficult. Installation of GSM repeaters require a lot of knowledge. We recommend that you order our authorized installater for this job. Improper installation may cause malfunction of the device and/or input disturbances to the network operators.

If you already have your own installer or you want to do it by yourself, you must sign a declaration on the assembly first.

You'll probably need the additional mounting accessories also. For easy selection and ordering the necessary tools, please see the link.

In addition we have in stock many accessories (dividers, cables, adapters, additional antennas).


Advantages:
 - 300 ~ 1000 m2 indoor coverage
 - Adopt two ports full - duplex design
 - Good reliability, meet the stdandard GB6993-8
 - The comp. of battery meet std. ETS300 609-4

Kit Include:
- GSM Booster
- Outdoor antenna (9 dBi) with 10 meters standard cable
- Indoor omnidirectional antenna (2,5 dBi)
- 10 - meter standard cable (for connecting indoor antenna)


Type:     GOR-60

Gain DL/UL: 60/50 dB

Max. output level: +10 dBm (10 mW)

Pass band ripple: 3 dB

Group delay: 1,5 ns

Spurious emiss. out of band: <= -40 dBm

Covering: 300 m2

Type:     GOR-70

Gain DL/UL: 70/60 dB

Max. output level: +17 dBm (50 mW)

Pass band ripple: 3 dB

Group delay: 1,5 ns

Spurious emiss. out of band: <= -40 dBm

Covering: 600 m2

Type:     GOR-80

Gain DL/UL: 80/70 dB

Max. output level: +27 dBm (0,5 W)

Pass band ripple: 3 dB

Group delay: 1,5 ns

Spurious emiss. out of band: <= -40 dBm

Covering: 1000 m2

All repeaters operate on electrical current AC 230 V, 50 Hz. Impedance is 50 Ohm.