MiQen

**********************

Version 1.00.0008
Date: 02.06.2009

   -MiQen Portugal language pack
   -Supported MC330, MC320, WQ0217, WQ1217, WQ2207, WQ0207
   -Supported analogue input for MC760, MC750, MC740, MT560, MT550, MT540
   -Supported pulse input for MC760, MC750, MC740, MT560, MT550, MT540
   -Harmonics recording for MC760 & MT560
   -Maximum demands recording & alarms for MC7xx & MT5xx
   -Improved interface for browsing Ethernet devices
   -MC7xx & MT5xx (3 phase): Push system on communication supported
   -MC7xx & MT5xx (3 phase): New settings for energy flow direction & CT Connection
   -MC7xx & MT5xx (3 phase): Bidirectional Current (Analogue output, Alarm, Memory) 
   -Alarm for Non-compliance according to the EN50160
   -MT511 Memory Reading corrections (frequency...)
   -MT518 Added frequency measurement
   -MT51x settings corrections (Tariff clock removed from pulse output, Digital input added to alarms)
   -Removed communication ports COM17 to COM32
   -Language issue with Tarrif clock dates removed (Hebrew\English)

**********************

Version 1.00.0007
Date: 15.04.2008

   -Windows Vista compatibility (Windows XP Run mode)
   -WinHelp replaced with HTML Help
   -Communication port setting: New form, Added USB, Added COM9...COM32
   -Supported Modbus TCP protocol
   -New types: (U)MT510, (U)MT511, (U)MT516, (U)MT518
   -New type: EX104
   -New type: MI7144
   -USB driver (md_usb.inf) included in Setup
   -Read only attributes for default settings files 
   -Memory reading: Error when Last reading date > Current date: Corrected
   -Measurements, harmonics not on graph when connection mode 1b: Corrected
   -(U)MC7X0, MC6XX Settings: Added Hebrew language (Firmware >= 1.04)
   -WS0XXX: Setting changes disabled for SW>=2.00
   -Settings: Measured energy form – added phase powers
   -Settings: Used voltage / current range – changed unit from % to V / A
   -Settings: New setting ‘Starting voltage for SYNC’ for (U)MC7X0, (U)MT5x0, MC6XX, MI400, MI401, MI404
   -Settings: New setting ‘Voltage / Current auto range control’ for MI400, MI401, MI404
   -Settings: New Ethernet settings: ‘Subnet Mask’ and ‘Default Router’
   -Settings: Analogue output maximum limited +-180° for PA anf fi

**********************

Version 1.00.0006
Date: 7.6.2007

   -New types: RD500
   -(U)MC7X0, (U)MT5X0, MC6XX Settings: Communication speed (bit/s) bug removed
   -Settings: (Analogue output, LCD, Alarms, Recorders) Parameter filter depend on connection

**********************

Version 1.00.0005
Date: 17.5.2007

   -MiQen French language pack
   -Devices: Added Browse ethernet devices & IP Address changing
   -New types: MT560, MT550, MT540
   -New types: MC666, MC660, MC656, MC650, MC646, MC640
   -Interactive Remote display MT500 for measuring transducers (MT5X0 & UMT5X0) 
   -(U)MC7X0 Settings: Added Portuguese language (Firmware >= 1.01)
   -Device Upgrades: Added History files
   -(U)MC7X0, (U)MT5X0 Settings: 1.200 b/s removed
   -Large Fonts (Windows) corrections
   -(U)MC7X0 Setting files corrections, °F calculation correction

**********************

Version 1.00.0004
Date: 24.11.2006

   -XPort communication improvements (FF Port 14000 to 14009)
   -Settings: Added settings for new Ethernet port (IP Address, Local port...)
   -Settings: Removed settings for communication speed & framing when using XPort
   -Settings: Added CT Connection setting for MC, UMC, & UMT products
   -Setting files: Added MiSet Modbus setting file (*.mbs) in Open dialog (Files of type)
   -Inputs & Outputs configuration: Added configuration for COM1
   -Installation: Name, Company & Serial No. read from registry when upgrading
   -Measurements: Improved refreshing when only one measuring table (MI4XX,WSXXX)
   -Analyses: MC760, MC750 Total Energy cost (E-$) removed from recordable parameters

**********************

Version 1.00.0003
Date: 4.10.2006

   -Settings: Added CAP/IND (C/L) for Power Factor analogue output breakpoints
   -MC760: Added Flickers Pst & Plt (measurements, memory recording and alarms)
   -MiQen Upgrade: Added View History file
   -Devices: Communication port settings refresh after downloading settings (if COM1 or COM2 settings changed)
   -Measurements: DNP3 Changed text for dynamic demands (Dyn MD)
   -MC760: Memory division decoding correction
   -German language text corrections
   -MiNet: COM2 - Searching corrections

**********************

Version 1.00.0002
Date: 7.9.2006

   -MiQen German language pack
   -New types: UMT560, UMT550, UMT540
   -New types: UMC760, UMC750, UMC740, UMC720, UMC710
   -MC760, MC750 and MC740: Secondary communication port COM2 supported
   -MC7x0: Inputs & Outputs configuration - Dual module correction
   -MI400, MI401 and MI404: Directional current measurements supported (Firmware >= 1.23)

**********************

Version 1.00.0001
Date: 20.7.2006

   -First official version

**********************